PFFK2125T256AL-T [TAIYO YUDEN]
Data Line Filter, 1 Function(s), 10V, 0.1A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 4 PIN;型号: | PFFK2125T256AL-T |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Data Line Filter, 1 Function(s), 10V, 0.1A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 4 PIN LTE |
文件: | 总7页 (文件大小:395K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
MULTILAYER EMI SUPPRESSION FILTERS
REFLOW
■ FEATURES
■ APPLICATIONS
◦2×1.25mm size EMI filter unifying multilayer capacitor and inductor T
series with rapid attenuation characteristics and TZ series with effec-
tive maintaining of waveform quality of digital signal are lined up.
◦Noise countermeasure in visual signal such as DVD, DSC, PDP, etc.
(T series)
◦Noise countermeasure and maintaining waveform quality in digital
signal processing circuit in personal computer, communication equip-
ment, etc. (TZ series)
◦Same shape as multilayer capacitor which is suitable for high speed mount-
ing by automatic machine.
■ OPERATING TEMPERATURE RANGE
◦-25~+85℃
■ ORDERING CODE
【T Series】
F K 2 1 2 5 T 2 5 6 A L ー T ○
❶
❷
❸
❹
❺
❻
❼
❽
❼Packaging
Tape & Reel
❶Type
Multilayer EMI
Suppression Filter
❸Equivalence circuit
T type
❹Cutoff frequency
example
❽Internal Code
Standard products
△=Blank space
❻Rated Voltage[V]
10
ーT
T
△
L
FK
186
256
18 MHz
25 MHz
❷External dimensions
(L×W)[mm]
❺Characteristic
example
2125(0805) 2.0×1.25
A
Sharp
【TZ Series】
F K 2 1 2 5 T Z 2 0 1 C 8 5 0 T ○
❶
❷
❸
❹
❺
❻
❼
❶Type
Multilayer EMI
Suppression Filter
❸Equivalence circuit
❹Nominal Impedance
[100MHz]
❺Nominal Capacitance
[1MHz]
❻Packaging
Tape & Reel
❼Internal Code
Standard products
△=Blank space
T
T type
T
△
FK
Z700
Z101
Z201
70Ω
100Ω
200Ω
C170
C500
C850
17pF
50pF
85pF
/
❷External dimensions
(L×W)[mm]
2125(0805) 2.0×1.25
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Standard Quantity [pcs]
Embossed tape
L
W
T
e1
e2
2.0±0.2
(0.079±0.008)
1.25±0.2
(0.049±0.008)
1.0±0.2
(0.039±0.008)
0.3±0.2
(0.012±0.008)
0.4±0.2
(0.016±0.008)
3000
Unit :mm (inch)
■ PART NUMBERS
●T Series
Characteristic
attnuation
EHS (Environmental
Hazardous
DC
resistance
max.
Cut-Off
Frequency
Rated
Rated
Insulation
Ordering code
insertion-loss
[1MHz]
Voltage current resistance
Substances
)
[50MHz] [100MHz][200MHz][350MHz][500MHz][600MHz][800MHz]
FK2125T186AL
FK2125T256AL
FK2125T406AL
FK2125T107AL
FK2125T167AL
FK2125T207AL
FK2125T407AL
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
18MHz±3.6MHz
25MHz±5MHz
40MHz±10MHz
100MHz±20MHz ≦1.0dB
160MHz±30MHz
≧20dB
≧15dB
ー
ー
ー
≧20dB
≧20dB
≧15dB
ー
ー
ー
ー
ー
≧20dB
≧20dB
ー
ー
ー
ー
≧20dB
≧20dB
≧20dB
≧20dB
≧20dB
≧20dB
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
ー
2Ω
3Ω
2Ω
100mA
DC
ー
10V DC
≧30MΩ
≧20dB
≧20dB
ー
200MHz±40MHz
400MHz±80MHz
ー
ー
ー
ー
ー
≧20dB
ー
≧20dB
ー
●TZ Series
EHS (Environmental
Hazardous
impedance
(terminal1-3)
[100MHz]
capacitance
(terminal1-2)
[1MHz]
DC resistance
max.
Rated
Voltage
Rated
current
Insulation
resistance
Ordering code
Substances
)
FK2125TZ700C170
FK2125TZ700C500
FK2125TZ700C850
FK2125TZ101C170
FK2125TZ101C500
FK2125TZ101C850
FK2125TZ201C850
RoHS
70Ω±30%
70Ω±30%
70Ω±30%
100Ω±30%
100Ω±30%
100Ω±30%
200Ω±30%
17pF±20%
50pF±20%
85pF±20%
17pF±20%
50pF±20%
85pF±20%
85pF±20%
RoHS
RoHS
100mA
DC
RoHS
2Ω
10V DC
≧30MΩ
RoHS
RoHS
RoHS
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
112
MULTILAYER EMI SUPPRESSION FILTERS
■PACKAGING
①Minimum Quantity
●Taped package
Standard Quantity [pcs]
Thickness
mm(inch)
1.0(0.039)
Type
Embossed tape
3000
FK 2125(0805)
②Tape material
●Embossed Tape
③Taping dimensions
●Embossed tape 8mm wide (0.031 inches wide)
Chip cavity
Insertion pitch
Tape thickness
Type
A
B
F
K
T
1.5±0.2
2.3±0.2
4.0±0.1
2.0 max.
0.3 max.
FK 2125(0805)
(0.059±0.008)
(0.091±0.008)
(0.157±0.004)
(0.079 max.)
(0.012 max.)
Unit : mm(inch)
④Leader and Blank portion
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
emifilter_pack_e-01
⑤Reel size
Unit : mm(inch)
⑥Top tape strength
The top tape requires a peel;-off force of 0.1~0.7N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
emifilter_pack_e-01
MULTILAYER EMI SUPPRESSION FILTERS
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
-25~+85℃
2. Storage Temperature Range
Specified Value
-25~+85℃
3. Rated Voltage
Specified Value
10V DC
4. Rated Current
Specified Value
100mA DC
5. Cutoff frequency (T Series)
18MHz±3.6MHz, 25MHz±5MHz, 40MHz±10MHz, 100MHz±20MHz,
160MHz±30MHz, 200MHz±40MHz, 400MHz±80MHz
Specified Value
Measuring equipment
Measuring source
: 8753D (or its equivalent)
Test Methods and
Remarks
: 0dBm
: 50Ω
Input-Output impedance
6. Impedance (TZ Series)
Specified Value 70Ω±30%, 100Ω±30%, 200Ω±30%
Measuring frequency : 100MHz
Test Methods and Measuring equipment
: 4291A (or its equivalent)
: 16192A
Remarks
Measuring jig
Measuring source
: -20dBm
7. Capacitance (TZ Series)
Specified Value 17pF±20%, 50pF±20%, 85pF±20%
Measuring equipment
Test Methods and Measuring voltage
: 4194A (or its equivalent)
: 0.5V
Remarks
Measuring frequency
: 1MHz
Capacitance measurement between Terminals 1 and 2.
8. DC Resistance
Specified Value
2Ω max., 3Ω max. (FK2125T107AL)
Test Methods and
Remarks
Conduct measurement between Terminals 1 and 3.
9. Insulation Resistance
Specified Value
30MΩ min.
Test Methods and Conduct measurement between Terminals 1 and 2.
Remarks
Applied voltage : 10VDC
10. Resistance to Flexure of Substrate
Specified Value
No mechanical damage.
Warp : 2mm
Testing board : glass epoxy-resin substrate
Thickness : 0.8mm
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
emifilter_reli_e-01
11. Solderability
Specified Value
At least 75% of terminal electrode is covered by new solder.
Solder temperature
Duration
: 230±5℃
: 4±1 sec.
Test Methods and
Remarks
Preheating temperature
Preheating time
Flux
: 150 to 180℃
: 2 to 3 min.
: Immersion into methanol solution with colophony for 3 to 5 sec.
12. Resistance to Soldering
Specified Value
No significant abnormality in appearance.
Solder temperature
Duration
: 260±5℃
: 10±0.5 sec.
Test Methods and
Remarks
Preheating temperature
Preheating time
Flux
: 150 to 180℃
: 2 to 3 min.
: Immersion into methanol solution with colophony for 3 to 5 sec.
13. Thermal Shock
Specified Value
No mechanical damage.
Insulation resistance (between 1 and 2)
DC resistance (between 1 and 3)
: 20MΩ min.
: 2Ω max.
: 3Ω max. (FK2125T107AL)
Conditions for 1 cycle
Step
Temperature (℃)
Duration (min)
1
2
3
4
Minimum operating temperature +0/-3
Room temperature
30±3
2 to 3
30±3
2 to 3
Test Methods and
Remarks
Maximum operating temperature +3/-0
Room temperature
Number of cycles
Recovery
: 5
: 2 to 3 hrs of recovery under the standard condition after the test.
14. Damp Heat steady state
No mechanical damage.
Insulation resistance (between 1 and 2)
DC resistance (between 1 and 3)
: 20MΩ min.
Specified Value
: 2Ω max.
: 3Ω max. (FK2125T107AL)
Temperature
Test Methods and Humidity
: 40±2℃
: 90 to 95%RH
: 500±12 hrs
Remarks
Duration
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
15. Loading under Damp Heat
No mechanical damage.
Insulation resistance (between 1 and 2)
DC resistance (between 1 and 3)
: 20MΩ min.
: 2Ω max.
Specified Value
: 3Ω max. (FK2125T107AL)
Temperature
Humidity
: 40±2℃
: 90 to 95%RH
Test Methods and Applied voltage
: Rated voltage (between 1 and 2)
Remarks
Applied current
Duration
: Rated current (between 1 and 3)
: 500±12 hrs
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
16. Loading at High Temperature
No mechanical damage.
Insulation resistance (between 1 and 2)
DC resistance (between 1 and 3)
: 20MΩ min.
: 2Ω max.
Specified Value
: 3Ω max. (FK2125T107AL)
Temperature
Applied voltage
Applied current
Duration
: 85±2℃
: Rated voltage (between 1 and 2)
Test Methods and
Remarks
: Rated current (between 1 and 3)
: 500±12 hrs
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
emifilter_reli_e-01
Note on standard condition :
"standard condition" referred to herein is defined as follows :
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of
air pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
※Circuit diagram
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
emifilter_reli_e-01
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明